Noctua NH-U9F Bedienungsanleitung PDF herunterladen (Seite 9)

NH-U12F

Installation Manual

[ AM2 Installation ][ Noctua NH-U12F ]

If there are traces of thermal paste or thermal pads on your CPU, please clean

them off first. Spread a thin coating of the supplied thermal paste on the CPU.

Caution: Applying too much thermal paste will lower the heat conductivity and

cooling performance!

Applying thermal paste

Step 4:

Caution: Peel off the protection film at the bottom side of the heatsink first!

Place the heatsink on the CPU, so that the mounting holes of the fastening

brackets screwed to the base of the cooler align with those of the mounting

bars.

Attaching the heatsink to the CPU

Step 5:

Now screw the fastening brackets to the mounting bars employing the

pressure springs and the respective screws.

When employing the 90° fastening brackets, please use the supplied

mounting-tool to tighten the springscrews.

Caution: Tighten the screws until they stop.

First stick the 2 anti-vibration strips onto the cooling fins in order to

dampen minor vibrations emitted by the fan.

Attaching the fan

Step 6:

Then attach the fan to the heatsink using 2 steel clips, placing it so that

it blows onto the heatsink (You can optionally use the second pair of

clips to install a second fan).

Depending on the orientation of the cooler, the fan should either blow towards

the rear side of the case or the power supply in accordance with the airflow

within the case.

Connect the fan to the mainboard, power supply or fan controller. Depending

on your CPU and the temperature inside the case, you may interconnect the

supplied Ultra-Low-Noise Adapter (U.L.N.A.) in order to further reduce the fan’s

operating noise.

Caution: When using the U.L.N.A., check the temperature of your CPU us-

ing appropriate software (e.g. the respective applications of your mainboard

manufacturer), in order to evade automatic throttling of the CPU due to the

increased temperature. If the cooling performance is insufficient, please increase

case ventilation or remove the U.L.N.A.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Noctua NH-U9F Bedienungsanleitung Seite 9