Noctua NH-C12P SE14 Bedienungsanleitung PDF herunterladen

NH-C12P SE14

Installation Manual INTEL

Removing the mainboard

Step 1:

In case you want to use the cooler on an assembled system,

you first have to remove the mainboard from the case in order

to be able to install the supplied backplate.

Caution: On LGA1366 and LGA1156/1155, the supplied back-

plate will install over the mainboard’s stock backplate, so the

mainboard’s stock backplate must not be taken off.

Required mounting parts:

First put the four bolts into the holes appropriate for your

mainboard’s CPU socket.

Setting up the backplate

Step 2:

Thank you very much for choosing a Noctua cooler. This

manual will guide you through the installation process of

the SecuFirm2

mounting system step by step.

Prior to installing the cooler, please consult the compat-

ibility list on our website and verify that the cooler is fully

compatible with your motherboard. Should you encounter

any difficulties, please check the FAQs on our website and

don’t hesitate to contact our support team at support@

noctua.at.

Noctua cannot be held responsible for any damage or losses

caused by compatibility issues.

Multilingual versions of this manual are available on our

website: www.noctua.at

Caution: Please verify that all four bolts are put into the ap-

propriate holes fully pushed in.

Step 4:

Installing the mounting bars

First put the plastic spacers onto the bolts, then add the mount-

ing bars.

Noctua NH-C12P SE14 INTEL

Installation Manual

4x plastic spacers 4x thumbscrews

1x 3-in-1 Intel backplate

4x bolts for backplate 2x mounting bars

LGA1366 (80mm)

LGA1156/1155 (75mm)

LGA775 (72mm)

For use on LGA1366 and LGA1156/1155 mainboards, please

remove the rubber inlay. Make sure that the rubber inlay is

in place for LGA775.

LGA1366 & LGA1156/1155 LGA775

Caution: On LGA1156/1155, please make sure that the two

cuts in the supplied backplate align with the screws of the

mainboard’s stock backplate.

Caution: Choose the alignment of the mounting bars according

to the desired final orientation of the cooler:

Step 3:

Attaching the backplate

Place the backplate on the rear side of the mainboard so that

the bolts stick through the mounting holes.

1x LGA775 rubber inlay

Caution: In tower style cases, please avoid installing the

NH-C12P SE14 with the bends of the heatpipes pointing

upwards as this may result in reduced cooling perform-

ance.

1 2 3 4

NH-C12P SE14 1

Inhaltsverzeichnis

Seite 1 - NH-C12P SE14

NH-C12P SE14 | Installation Manual INTELRemoving the mainboardStep 1:In case you want to use the cooler on an assembled system, you fi

Seite 2

For all enquiries concerning your Noctua cooler, both your retailer and the international Noctua support team at [email protected] are at your service

Seite 3

NH-C12P SE14 | Installation Manual AMDRequired mounting parts:First put the plastic spacers onto the screw threads, then fix the moun

Seite 4

NH-C12P SE14 | Installation Manual AMDAttaching the fanStep 5:First stick the 4 anti-vibration pads onto the cooling fins in order t

Weitere Dokumente für Computerzubehör Noctua NH-C12P SE14

Um das Dokument anzuzeigen Noctua NH-C12P SE14 Bedienungsanleitung

Noctua NH-C12P SE14 Bedienungsanleitung (4 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Noctua NH-C12P SE14 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computerzubehör Noctua NH-C12P SE14 herunter. Noctua NH-C12P SE14 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Computerzubehör Noctua NH-C12P SE14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Noctua NH-C12P SE14